Reduced Work Time Spent Replacing Parts
Work time has been significantly reduced by designing parts that are easy to disassemble and clean and also by reducing the overall number of parts.
Fully Automatic Capsule Filling Machine JCF-100
Pharmaceutical equipment for capsules
Fully Automatic Capsule Filling Machine
JCF-100
An auger capsule filling machine that can handle a wide variety of powders.
Features
Processing Capacity of 100,000 Capsules/Hour
A larger paddle and a revamped capsule transfer mechanism enable the filling of up to 100,000 capsules per hour.
Easy to Operate
The improvement of the adjustable parts has made it easy to operate.
The JCF-100 can handle a wide variety of powders
The screw-type auger filling mechanism is suitable for powders that cannot be filled by die compression or mechanical vibration.
The JCF-100 has a larger paddle and a new capsule supply and transfer mechanism, enabling it to fill up to 100,000 capsules per hour, which is approximately 2.5 times the capacity of the previous JCF-40 model.
Improved Filling Capacity due to the Change in Shape of the Auger Paddle
Enlarging the paddle has enabled reliable filling even at high speeds, thus improving the filling capacity compared to previous models.
The auger and the paddle, which had a single-axis structure in the previous model, are now dual-axis, allowing the torque and rotation speed to be controlled separately, thereby expanding the fill adjustment range. This makes it possible to fine-tune the optimal conditions for filling the powder.
A Revamped Capsule Supply and Transfer Mechanism
To improve processing capacity, the JCF-100 features a new capsule supply and transfer mechanism. It also has an improved de-clogging mechanism, which significantly reduces equipment downtime.
Reduced Time Spent Replacing Parts
Parts are Designed for Easy Disassembly and Cleaning
The service hopper, drums, chutes, unseparated capsule removal unit, coupling roller, etc. can be replaced without tools.
Reduction of the Number of Transfer Parts
The transfer mechanism has less than half the number of parts compared to conventional models.
Disassembly and assembly have also been made easier, and the time required to replace parts can be reduced by 40%.
Easier to Clean
By integrating the discharge chute and the cleaner into a single unit, the number of replacement parts, pneumatic couplers, and support struts has been reduced. The joint supports can also be removed, which reduces cleaning time.
